-01-

In the later construction, it should be noted that drilling, nailing or wedging into any sharp objects should not be carried out in the area of the electric heat film paving, so as not to destroy the electric heat film.

-02-

After installing floor heating, you can lay tile, marble or wood floors. The thickness of the backfill cement layer is recommended to be about 3 to 4 cm, so as not to affect the heating rate too thick; Wood floor can choose the floor heating special composite wood floor, more stable and durable.

-03-

After the tile is laid, the cement hardening takes some time to reach a relatively strong hardness. If the floor heating is turned on during this period, the moisture of the cement will evaporate quickly, resulting in empty floors. Therefore, after laying the tile, it is recommended to open the floor heating when the cement strength reaches 70% (generally 21 days).

-04-

In addition to hard installation, there are also concerns about soft installation. Choose furniture with legs, which is conducive to better heat dissipation; On the floor, try not to enlarge the area of carpets, foam, plastic products, etc., so as not to cause heat accumulation and affect the use effect.

-05-

Home safety always comes first. In the decoration, a lot of wooden furniture and wood flooring will be used, which itself has the problem of formaldehyde release. In addition to using panels that meet environmental protection requirements, it is recommended to carry out environmental protection acceptance of the house before moving in to ensure that the release of free formaldehyde meets the standard provisions.

-06-

Whether it is a new residence or the first heating in the heating season, the heating should follow the principle of "step by step". The first day preheat first, and then gradually upward, and to maintain the heating state for 72 hours without stopping. This can give the floor a time to adapt, in case the sudden warming affects its service life.

-07-

In daily operation, the floor heating temperature is recommended to be set between 18 ° C and 22 ° C; The temperature difference between adjacent rooms is recommended to be controlled within 5℃; Leaving the room for a short time can appropriately reduce the room temperature; Uninhabited for a long time for anti-freezing can be set to 5℃ low temperature operation.

In addition to the above precautions, if users do not understand the problem, you can also contact Warmtact through the public number, Tiktok, the official website, official phone and other channels, we will try to solve everyone's problems, to help everyone warm without worry.